Bonding Why Shipments Get Rejected Over This
Many disputes come down to Bonding. Below is what inspectors check and why shipments fail.
The core definition
joining two fabrics with adhesive film. Working figures for Bonding normally sit around film thickness 0.05-0.15 mm in mainstream production. Note ISO 15797 dimensional check plus peel test on the tech pack so nobody tests against an older revision.
Most common cause of failure
Results usually fall outside film thickness 0.05-0.15 mm because the target was never written into the order. Record elastane content alongside Bonding, because blends shift the measured value. A result outside film thickness 0.05-0.15 mm usually points to process drift rather than to the fibre itself.
How it is checked
Inspection and laboratory work both refer to ISO 15797 dimensional check plus peel test. Keeping reference values for Bonding lets suppliers quote without extra sampling rounds. Ask for conditioning details together with ISO 15797 dimensional check plus peel test, since both affect the reading.
Related faults
it replaces sewing and reduces seam bulk, so related complaints often point back to this single parameter. Working figures for Bonding normally sit around film thickness 0.05-0.15 mm in mainstream production. Note ISO 15797 dimensional check plus peel test on the tech pack so nobody tests against an older revision.
Avoiding rejection
Agree targets, tolerances and the method before production, then test per lot rather than per shipment. Record elastane content alongside Bonding, because blends shift the measured value. A result outside film thickness 0.05-0.15 mm usually points to process drift rather than to the fibre itself.
