-
Source:News / Time:2026-09-21
Chlorine and Sunscreen Resistance for Multi-Sport Use
What to test when a sports bra is sold for multi-sport use: chlorine attack on elastane rather than just colour, fibre selection, sunscreen and DEET spot tests, UPF limits around cut-out openings, and care labelling that reduces damage.
Details -
Source:News / Time:2026-09-21
Pilling and Abrasion Resistance in Stretch Knits
Specifying pilling, abrasion and snagging resistance for stretch knit sports bras: which method to name, acceptance grades, why elastane shows grin-through, the zones that wear first, fix options and their side effects on wicking.
Details -
Source:News / Time:2026-09-21
Double-Knit vs Single-Jersey for Sports Bra Shells
Comparing double knit and single jersey for sports bra shells: edge behaviour on cut-out back openings, support and recovery, spirality and dimensional stability, cost per unit and where single jersey still makes sense.
Details -
Source:News / Time:2026-09-21
Lining Fabric Choices: Moisture Transfer and Skin Comfort
Choosing lining fabric for a sports bra: containment versus comfort roles, polyester and nylon moisture behaviour, push-pull transfer, testing the bonded assembly rather than the swatch, skin comfort and shrinkage matching with the shell.
Details -
Source:News / Time:2026-09-21
Colour Fastness Requirements for Sports Bra Fabrics
The colour fastness specification sports bra fabrics need: washing, perspiration, rubbing, light, water and chlorinated water grades, why deep nylon shades bleed, in-house sunscreen and deodorant tests, and shade control across a program.
Details -
Source:News / Time:2026-09-21
Spandex Denier and Elastane Content: Impact on Compression
How elastane percentage and spandex denier together set compression in a sports bra shell, which denier belongs in shells, power mesh and underbands, heat setting and chlorine limits, and the modulus numbers to put on a spec.
Details -
Source:News / Time:2026-09-21
Breathable Mesh Insert Placement in Cut-Out Back Designs
Where to place breathable mesh in a cut-out back sports bra: backing the opening, stabilising the cup and underband, keeping edges clear of the shoulder blade, air permeability and shrinkage matching, and edge finishing options.
Details -
Source:News / Time:2026-09-21
Antibacterial Finishes for Sports Bras: Standards and Limitations
What antibacterial finishes can and cannot do for sports bras: ISO 20743 versus ISO 17299-2, wash durability to ISO 6330, finish chemistry, EU biocidal and US EPA claim limits, and why ventilation matters more than chemistry.
Details -
Source:News / Time:2026-09-21
Four-Way Stretch Testing: Recovery Standards Buyers Should Request
How to specify four-way stretch and recovery for sports bra fabrics: separating stretch from recovery, naming ASTM D4964 or ISO 20932-1, acceptance values for medium impact shells and underbands, and testing after repeated laundering.
Details -
Source:News / Time:2026-09-21
Fabric GSM Selection for Medium Impact Sports Bras
How to choose fabric gsm for a medium impact sports bra: working weight ranges, why weight is not the same as support, opacity and cut-out back considerations, cost per gram, and the tolerances and tests to hold bulk to.
Details
News
