Welcome to Xinlang Textile official website!

Trailhead Union Portugal: Cycling Team Kit Colour and Appearance Review

Source:Customer Cases / Time:2026-09-16

Trailhead Union is a Portugal-based brand whose cycling team kit is one of its most demanding programmes. Appearance decides whether a customer reorders. This review tracks how the power mesh warp knit holds its colour and surface through wear and washing for Trailhead Union.

Trailhead Union: Power Mesh Warp Knit in use during road and indoor cycling blocks

Trailhead Union: Power Mesh Warp Knit in use during road and indoor cycling blocks

Evaluation background

The programme covers jerseys, bib shorts and base layers, used for road and indoor cycling blocks. The environment is a forward position with continuous sweat at the back panel and the requirement written into the brief was a stable print surface with aerodynamic fit. Fabric was selected on that basis rather than on price alone.

Fabric under evaluation

ParameterValue
FabricPower Mesh Warp Knit
Composition85% nylon / 15% spandex
Weight130 GSM
Width170 cm
Primary functiongives controlled support with maximum air exchange
Targetair permeability above 400 mm/s
Test methodISO 11092
Additional noteventilation mapped onto the pattern
CertificationOEKO-TEX Standard 100

Power Mesh Warp Knit close-up showing the fabric surface

Power Mesh Warp Knit close-up showing the fabric surface

Colour measurement

Shade was measured instrumentally against the approved standard and scored by eye under retail lighting. Both methods stayed inside the agreed tolerance across every lot.

Wash and light fastness

Colour fastness to washing reached grade 4-5 and light fastness met the requirement for road and indoor cycling blocks. Shade change after repeated washing was not visible to the panel.

Evaluation session with the Trailhead Union team

Evaluation session with the Trailhead Union team

Surface appearance

Pilling, snagging and shine were assessed after wear. No shine developed under a forward position with continuous sweat at the back panel, which is where friction normally shows first on this product type.

Shade continuity

Production was consolidated into controlled dye lots so repeat orders match. Retained standards are held for two years to support reordering without new development.

Test records and inspection notes for the Cycling Team Kit

Test records and inspection notes for the Cycling Team Kit

Scorecard

CriterionResult
Shade accuracy4.5 / 5
Wash fastness4.7 / 5
Light fastness4.4 / 5
Surface appearance4.6 / 5
Lot consistency4.5 / 5
“Development was transparent from the first sample and bulk matched the approval exactly.” — Trailhead Union Technical Team

Packed bulk rolls before shipment to Portugal

Packed bulk rolls before shipment to Portugal

Verdict and recommendation

Appearance was maintained through wear and washing, and the power mesh warp knit is approved for repeat orders against the retained shade standard. For Trailhead Union the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue ISO 11092 results with every lot so any claim can be supported with data.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top