Welcome to Xinlang Textile official website!

Auralite Active Denmark: Medical Compression and Recovery Wear Durability and Abrasion Evaluation

Source:Customer Cases / Time:2026-09-16

Auralite Active is a Denmark-based brand whose medical compression and recovery wear is one of its most demanding programmes. Abrasion is the most common reason a technical garment is retired. We evaluated the spacer knit against the contact surfaces found in medical compression and recovery wear.

Auralite Active: Spacer Knit in use during recovery wear worn for long periods

Auralite Active: Spacer Knit in use during recovery wear worn for long periods

Evaluation background

The programme covers recovery tights, sleeves and support tops, used for recovery wear worn for long periods. The environment is continuous graduated pressure against the skin and the requirement written into the brief was measured compression with skin-safe materials. Fabric was selected on that basis rather than on price alone.

Fabric under evaluation

ParameterValue
FabricSpacer Knit
Composition100% polyester spacer construction
Weight330 GSM
Width175 cm
Primary functioncushions and ventilates in a single piece of fabric
Targetair permeability above 200 mm/s with usable thermal resistance
Test methodISO 11092
Additional notecompression set below 10%
CertificationOEKO-TEX Standard 100

Spacer Knit close-up showing the fabric surface

Spacer Knit close-up showing the fabric surface

Method

Fabric was abraded to ASTM D4966 against both a standard wool abradant and the actual contact surface used in recovery wear worn for long periods. Seam strength was tested to ISO 13936-2 in parallel.

Results

The fabric passed the agreed cycle count with no yarn breakage and seam opening stayed inside the 6 mm limit. Pilling remained at grade 4 or above at the end of the test.

Evaluation session with the Auralite Active team

Evaluation session with the Auralite Active team

Where wear appeared

Any surface change appeared first under continuous graduated pressure against the skin, which is expected and is why we recommend panel placement rather than a single fabric across the whole garment.

Service life estimate

On this data the garment should complete a full competitive season before appearance becomes a reason to replace it, which is the commercial target Auralite Active set at the start.

Test records and inspection notes for the Medical Compression and Recovery Wear

Test records and inspection notes for the Medical Compression and Recovery Wear

Scorecard

CriterionResult
Abrasion cycles4.4 / 5
Pilling grade4.9 / 5
Seam strength4.5 / 5
Appearance4.7 / 5
Estimated service life4.3 / 5
“Our athletes noticed the difference in the first week, and the test data explained why.” — Auralite Active Technical Team

Packed bulk rolls before shipment to Denmark

Packed bulk rolls before shipment to Denmark

Verdict and recommendation

Durability is sufficient for the intended use. Keep the current construction and revisit only if the garment moves into a higher abrasion category. For Auralite Active the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue ISO 11092 results with every lot so any claim can be supported with data.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top