Bluearbor Athletics Portugal: Medical Compression and Recovery Wear Durability and Abrasion Evaluation
Bluearbor Athletics is a Portugal-based brand whose medical compression and recovery wear is one of its most demanding programmes. Abrasion is the most common reason a technical garment is retired. We evaluated the compression warp knit against the contact surfaces found in medical compression and recovery wear.
Bluearbor Athletics: Compression Warp Knit in use during recovery wear worn for long periods
Evaluation background
The programme covers recovery tights, sleeves and support tops, used for recovery wear worn for long periods. The environment is continuous graduated pressure against the skin and the requirement written into the brief was measured compression with skin-safe materials. Fabric was selected on that basis rather than on price alone.
Fabric under evaluation
| Parameter | Value |
|---|---|
| Fabric | Compression Warp Knit |
| Composition | 72% nylon / 28% spandex |
| Weight | 250 GSM |
| Width | 160 cm |
| Primary function | delivers graduated support that stays measurable over time |
| Target | recovery above 92% after repeated extension |
| Test method | ASTM D2594 |
| Additional note | power held in the 18-25 N band |
| Certification | OEKO-TEX Standard 100 |
Compression Warp Knit close-up showing the fabric surface
Method
Fabric was abraded to ASTM D4966 against both a standard wool abradant and the actual contact surface used in recovery wear worn for long periods. Seam strength was tested to ISO 13936-2 in parallel.
Results
The fabric passed the agreed cycle count with no yarn breakage and seam opening stayed inside the 6 mm limit. Pilling remained at grade 4 or above at the end of the test.
Evaluation session with the Bluearbor Athletics team
Where wear appeared
Any surface change appeared first under continuous graduated pressure against the skin, which is expected and is why we recommend panel placement rather than a single fabric across the whole garment.
Service life estimate
On this data the garment should complete a full competitive season before appearance becomes a reason to replace it, which is the commercial target Bluearbor Athletics set at the start.
Test records and inspection notes for the Medical Compression and Recovery Wear
Scorecard
| Criterion | Result |
|---|---|
| Abrasion cycles | 4.5 / 5 |
| Pilling grade | 4.7 / 5 |
| Seam strength | 4.4 / 5 |
| Appearance | 4.6 / 5 |
| Estimated service life | 4.5 / 5 |
“This is the first season with no comfort complaints in this category.” — Bluearbor Athletics Technical Team
Packed bulk rolls before shipment to Portugal
Verdict and recommendation
Durability is sufficient for the intended use. Keep the current construction and revisit only if the garment moves into a higher abrasion category. For Bluearbor Athletics the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue ASTM D2594 results with every lot so any claim can be supported with data.
