Lumenfield Denmark: Trail Running Programme Durability and Abrasion Evaluation
Lumenfield is a Denmark-based brand whose trail running programme is one of its most demanding programmes. Abrasion is the most common reason a technical garment is retired. We evaluated the graphene cooling knit against the contact surfaces found in trail running programme.
Lumenfield: Graphene Cooling Knit in use during long off-road efforts on mixed terrain
Evaluation background
The programme covers trail shorts, technical tees and light shells, used for long off-road efforts on mixed terrain. The environment is mud, grit, wind and rapid weather changes and the requirement written into the brief was abrasion resistance with fast drying after stream crossings. Fabric was selected on that basis rather than on price alone.
Fabric under evaluation
| Parameter | Value |
|---|---|
| Fabric | Graphene Cooling Knit |
| Composition | 90% polyester / 10% spandex with graphene filament |
| Weight | 170 GSM |
| Width | 160 cm |
| Primary function | gives an instant cool touch and spreads heat away from the body |
| Target | Q-max above 0.20 W/cm2 |
| Test method | Q-max contact cool feeling measurement |
| Additional note | far infrared emissivity above 0.88 |
| Certification | OEKO-TEX Standard 100 |
Graphene Cooling Knit close-up showing the fabric surface
Method
Fabric was abraded to ASTM D4966 against both a standard wool abradant and the actual contact surface used in long off-road efforts on mixed terrain. Seam strength was tested to ISO 13936-2 in parallel.
Results
The fabric passed the agreed cycle count with no yarn breakage and seam opening stayed inside the 6 mm limit. Pilling remained at grade 4 or above at the end of the test.
Evaluation session with the Lumenfield team
Where wear appeared
Any surface change appeared first under mud, grit, wind and rapid weather changes, which is expected and is why we recommend panel placement rather than a single fabric across the whole garment.
Service life estimate
On this data the garment should complete a full competitive season before appearance becomes a reason to replace it, which is the commercial target Lumenfield set at the start.
Test records and inspection notes for the Trail Running Programme
Scorecard
| Criterion | Result |
|---|---|
| Abrasion cycles | 4.5 / 5 |
| Pilling grade | 4.7 / 5 |
| Seam strength | 4.4 / 5 |
| Appearance | 4.6 / 5 |
| Estimated service life | 4.5 / 5 |
“Fifty washes later the fabric still performs. That is what convinced our buying team.” — Lumenfield Technical Team
Packed bulk rolls before shipment to Denmark
Verdict and recommendation
Durability is sufficient for the intended use. Keep the current construction and revisit only if the garment moves into a higher abrasion category. For Lumenfield the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue Q-max contact cool feeling measurement results with every lot so any claim can be supported with data.
