Auralite Active Switzerland: Trail Running Programme Durability and Abrasion Evaluation
Auralite Active is a Switzerland-based brand whose trail running programme is one of its most demanding programmes. Abrasion is the most common reason a technical garment is retired. We evaluated the power mesh warp knit against the contact surfaces found in trail running programme.
Auralite Active: Power Mesh Warp Knit in use during long off-road efforts on mixed terrain
Evaluation background
The programme covers trail shorts, technical tees and light shells, used for long off-road efforts on mixed terrain. The environment is mud, grit, wind and rapid weather changes and the requirement written into the brief was abrasion resistance with fast drying after stream crossings. Fabric was selected on that basis rather than on price alone.
Fabric under evaluation
| Parameter | Value |
|---|---|
| Fabric | Power Mesh Warp Knit |
| Composition | 85% nylon / 15% spandex |
| Weight | 130 GSM |
| Width | 170 cm |
| Primary function | gives controlled support with maximum air exchange |
| Target | air permeability above 400 mm/s |
| Test method | ISO 11092 |
| Additional note | ventilation mapped onto the pattern |
| Certification | OEKO-TEX Standard 100 |
Power Mesh Warp Knit close-up showing the fabric surface
Method
Fabric was abraded to ASTM D4966 against both a standard wool abradant and the actual contact surface used in long off-road efforts on mixed terrain. Seam strength was tested to ISO 13936-2 in parallel.
Results
The fabric passed the agreed cycle count with no yarn breakage and seam opening stayed inside the 6 mm limit. Pilling remained at grade 4 or above at the end of the test.
Evaluation session with the Auralite Active team
Where wear appeared
Any surface change appeared first under mud, grit, wind and rapid weather changes, which is expected and is why we recommend panel placement rather than a single fabric across the whole garment.
Service life estimate
On this data the garment should complete a full competitive season before appearance becomes a reason to replace it, which is the commercial target Auralite Active set at the start.
Test records and inspection notes for the Trail Running Programme
Scorecard
| Criterion | Result |
|---|---|
| Abrasion cycles | 4.5 / 5 |
| Pilling grade | 4.7 / 5 |
| Seam strength | 4.4 / 5 |
| Appearance | 4.6 / 5 |
| Estimated service life | 4.5 / 5 |
“Our athletes noticed the difference in the first week, and the test data explained why.” — Auralite Active Technical Team
Packed bulk rolls before shipment to Switzerland
Verdict and recommendation
Durability is sufficient for the intended use. Keep the current construction and revisit only if the garment moves into a higher abrasion category. For Auralite Active the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue ISO 11092 results with every lot so any claim can be supported with data.
