Welcome to Xinlang Textile official website!

Meridian Form Finland: Cycling Team Kit Comfort and Fit Evaluation

Source:Customer Cases / Time:2026-09-16

Meridian Form is a Finland-based brand whose cycling team kit is one of its most demanding programmes. Performance data means nothing if the garment is uncomfortable. This evaluation covers how the power mesh warp knit behaves on the body during cycling team kit work.

Meridian Form: Power Mesh Warp Knit in use during road and indoor cycling blocks

Meridian Form: Power Mesh Warp Knit in use during road and indoor cycling blocks

Evaluation background

The programme covers jerseys, bib shorts and base layers, used for road and indoor cycling blocks. The environment is a forward position with continuous sweat at the back panel and the requirement written into the brief was a stable print surface with aerodynamic fit. Fabric was selected on that basis rather than on price alone.

Fabric under evaluation

ParameterValue
FabricPower Mesh Warp Knit
Composition85% nylon / 15% spandex
Weight120 GSM
Width170 cm
Primary functiongives controlled support with maximum air exchange
Targetair permeability above 400 mm/s
Test methodISO 11092
Additional noteventilation mapped onto the pattern
CertificationOEKO-TEX Standard 100

Power Mesh Warp Knit close-up showing the fabric surface

Power Mesh Warp Knit close-up showing the fabric surface

Fit assessment

Size sets were fitted on live models and on a fit form. Fabric extension was measured at the stress points so the pattern could be corrected before bulk cutting.

Movement testing

Wearers performed the movements specific to road and indoor cycling blocks while panel tension was observed. No restriction was reported and recovery between movements was immediate.

Evaluation session with the Meridian Form team

Evaluation session with the Meridian Form team

Next-to-skin comfort

Surface friction, hand and temperature sensation were scored by the panel. The fabric scored best where a stable print surface with aerodynamic fit, which is the priority Meridian Form set for this product.

Fit retention

Garments were measured after five and twenty washes. Growth stayed within tolerance, so the fit approved in sampling is the fit the customer eventually receives.

Test records and inspection notes for the Cycling Team Kit

Test records and inspection notes for the Cycling Team Kit

Scorecard

CriterionResult
Next-to-skin feel4.8 / 5
Freedom of movement4.6 / 5
Recovery4.5 / 5
Fit retention4.7 / 5
Seam comfort4.4 / 5
“The report gave us numbers we could put in front of our retail partners without any argument.” — Meridian Form Technical Team

Packed bulk rolls before shipment to Finland

Packed bulk rolls before shipment to Finland

Verdict and recommendation

Comfort and fit were confirmed in wear, and the power mesh warp knit is approved for bulk with the current pattern. For Meridian Form the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue ISO 11092 results with every lot so any claim can be supported with data.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top