Nordkraft Wear Portugal: Medical Compression and Recovery Wear Climate and Heat Evaluation
Nordkraft Wear is a Portugal-based brand whose medical compression and recovery wear is one of its most demanding programmes. Heat changes how a fabric behaves, so we evaluated the spacer knit in genuinely hot conditions for Nordkraft Wear, based in Portugal.
Nordkraft Wear: Spacer Knit in use during recovery wear worn for long periods
Evaluation background
The programme covers recovery tights, sleeves and support tops, used for recovery wear worn for long periods. The environment is continuous graduated pressure against the skin and the requirement written into the brief was measured compression with skin-safe materials. Fabric was selected on that basis rather than on price alone.
Fabric under evaluation
| Parameter | Value |
|---|---|
| Fabric | Spacer Knit |
| Composition | 100% polyester spacer construction |
| Weight | 320 GSM |
| Width | 175 cm |
| Primary function | cushions and ventilates in a single piece of fabric |
| Target | air permeability above 200 mm/s with usable thermal resistance |
| Test method | ISO 11092 |
| Additional note | compression set below 10% |
| Certification | OEKO-TEX Standard 100 |
Spacer Knit close-up showing the fabric surface
Test environment
Sessions ran at 30 to 34 degrees with high humidity, which is the condition where sweat cannot evaporate and complaints begin. Garments were weighed before and after each session to measure retained moisture.
Thermal behaviour
The fabric held air permeability above 200 mm/s with usable thermal resistance, and skin temperature stayed below the control fabric across the session. That difference is what a wearer describes simply as feeling cooler.
Evaluation session with the Nordkraft Wear team
Drying after the session
Garments were re-weighed at 30 and 60 minutes. The fabric released most of its moisture within the first half hour, which matters when Nordkraft Wear runs back-to-back sessions.
Comfort feedback
Wearers reported less cling and less chafe during recovery wear worn for long periods. Both improvements come from moving moisture rather than storing it, which is why construction mattered more than any finish in this test.
Test records and inspection notes for the Medical Compression and Recovery Wear
Scorecard
| Criterion | Result |
|---|---|
| Heat comfort | 4.7 / 5 |
| Moisture transport | 4.4 / 5 |
| Drying speed | 4.8 / 5 |
| Cling and chafe | 4.6 / 5 |
| Odour control | 4.5 / 5 |
“Development was transparent from the first sample and bulk matched the approval exactly.” — Nordkraft Wear Technical Team
Packed bulk rolls before shipment to Portugal
Verdict and recommendation
For hot and humid markets the spacer knit is the right choice, provided the pattern keeps the ventilation zones exactly where we placed them. For Nordkraft Wear the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue ISO 11092 results with every lot so any claim can be supported with data.
