Meridian Form Sweden: Industrial Workwear and Uniforms Wash Durability Evaluation
Meridian Form is a Sweden-based brand whose industrial workwear and uniforms is one of its most demanding programmes. Durability is where most functional claims fail. We washed the bonded softshell knit fifty times under domestic conditions and re-measured after every ten cycles for Meridian Form.
Meridian Form: Bonded Softshell Knit in use during long shifts in active physical roles
Evaluation background
The programme covers work shirts, trousers and fleece layers, used for long shifts in active physical roles. The environment is abrasive surfaces and industrial washing at high temperature and the requirement written into the brief was durability with easy care across a large size range. Fabric was selected on that basis rather than on price alone.
Fabric under evaluation
| Parameter | Value |
|---|---|
| Fabric | Bonded Softshell Knit |
| Composition | polyester face bonded to a TPU membrane |
| Weight | 300 GSM |
| Width | 170 cm |
| Primary function | blocks wind while still allowing vapour to escape |
| Target | water vapour resistance below 6 m2Pa/W |
| Test method | ISO 11092 |
| Additional note | bond strength above 15 N after washing |
| Certification | OEKO-TEX Standard 100 |
Bonded Softshell Knit close-up showing the fabric surface
Method
Washing ran at 30 degrees with a standard reference detergent and no softener, then tumble dried on low. This mirrors what customers actually do rather than what a care label optimistically suggests.
Performance by cycle
The fabric started at water vapour resistance below 6 m2Pa/W and held above 90% of that value through 30 cycles. The decline after cycle 40 was gradual, which is the behaviour we want: a slow change, not a sudden failure.
Evaluation session with the Meridian Form team
Appearance
Pilling stayed at grade 4 or above and there was no visible shade shift against the retained reference. Surface comfort after washing mattered most to Meridian Form, so hand was scored by a panel at every interval.
Conclusion on service life
On this evidence the garment keeps its function for a full retail season of weekly washing, and ISO 11092 remains a valid claim for that period.
Test records and inspection notes for the Industrial Workwear and Uniforms
Scorecard
| Criterion | Result |
|---|---|
| Function after 30 washes | 4.9 / 5 |
| Appearance retention | 4.5 / 5 |
| Pilling grade | 4.6 / 5 |
| Hand retention | 4.3 / 5 |
| Shade | 4.7 / 5 |
“The report gave us numbers we could put in front of our retail partners without any argument.” — Meridian Form Technical Team
Packed bulk rolls before shipment to Sweden
Verdict and recommendation
Fifty cycles is a reasonable service life for this product class, and the bonded softshell knit stayed inside tolerance throughout. Care wording should be printed exactly as tested. For Meridian Form the practical next steps are to keep the current specification for the repeat, retain the shade standard, and issue ISO 11092 results with every lot so any claim can be supported with data.
